DOOR COURTESY LIGHT(for Rear Door) INSPECTION

PROCEDURE


  1. INSPECT COURTESY LIGHT ASSEMBLY (for LH Side)


    1. B006F4RC21
      *a

      Component without harness connected

      (Courtesy Light Assembly)

      Inspect the courtesy light assembly.

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      J8-2 (B) - Battery positive (+)

      J8-1 (SW) - Battery negative (-)

      		 Courtesy light assembly illuminates

      If the result is not as specified, replace the courtesy light assembly.

  2. INSPECT COURTESY LIGHT ASSEMBLY (for RH Side)


    1. B005THNC20
      *a

      Component without harness connected

      (Courtesy Light Assembly)

      Inspect the courtesy light assembly.

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Tester Connection Specified Condition

      J4-2 (B) - Battery positive (+)

      J4-1 (SW) - Battery negative (-)

      		 Courtesy light assembly illuminates

      If the result is not as specified, replace the courtesy light assembly.