REAR SEAT INNER BELT ASSEMBLY(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH

    B004L98C05
    *a

    Component without harness connected

    (Rear Seat Inner with Center Belt Assembly RH)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      5 - 4 Rear RH seat belt unfastened Below 1 Ω
      Rear RH seat belt fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly RH.