ANTI-LOCK BRAKE SYSTEM
| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
The anti-lock brake system troubleshooting procedures are based on the premise that the CAN communication system is functioning normally. Check the CAN communication system first before troubleshooting the anti-lock brake system.
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to
NEXT
CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the trouble.
Result
Proceed to
NEXT
CHECK DTC AND FREEZE FRAME DATA*
Check and record DTC and Freeze Frame Data.
for DTC Check/Clear:Click here
for Freeze Frame Data:Click here
Clear the DTC and Freeze Frame Data.
for DTC Check/Clear:Click here
for Freeze Frame Data:Click here
Reconfirm the DTC.
Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.
for DTC Check/Clear:Click here
for Freeze Frame Data:Click here
Result
Proceed to
DTC output
DTC is not output (Problem symptom does not occur)
DTC is not output (Problem symptom occurs)
DTC is not output (Problem symptom does not occur) SYMPTOM SIMULATIONClick here
DTC is not output (Problem symptom occurs) PROBLEM SYMPTOMS TABLEClick here
DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart.
Result
Proceed to
NEXT
NEXT CIRCUIT INSPECTION*Click here
SYMPTOM SIMULATION
Proceed to Check for Intermittent Problems.
Result
Proceed to
NEXT
PROBLEM SYMPTOMS TABLE
Proceed to Problem Symptoms Table.
Result
Proceed to
NEXT
CIRCUIT INSPECTION*
Result
Proceed to
NEXT
IDENTIFICATION OF PROBLEM
Result
Proceed to
NEXT
REPAIR OR REPLACE
Result
Proceed to
NEXT
CONFIRMATION TEST*
Result
Proceed to
NEXT
NEXT END