BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE

1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY

   1. 

      w/ Entry and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Switch Condition	Specified Condition
      1 (UL) - 2 (L)	Lock switch pushed	Below 1 Ω
      1 (UL) - 2 (L) 3 (B) - 2 (L)	Lock switch and open switch not pushed	10 kΩ or higher
      3 (B) - 2 (L)	Open switch pushed	Below 1 Ω

      • If the result is not as specified, replace the back door opener switch assembly.

   2. 

      w/o Entry and Start System:

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection	Switch Condition	Specified Condition
      3 (B) - 2 (L)	Open switch pushed	Below 1 Ω
      3 (B) - 2 (L)	Open switch not pushed	10 kΩ or higher

      • If the result is not as specified, replace the back door opener switch assembly.