AIR CONDITIONING PANEL(for Automatic Air Conditioning System) REMOVAL

PROCEDURE

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (except Sedan)

    Click here

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except Sedan)

    Click here

  3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (except Sedan)

    Click here

  4. REMOVE CENTER INSTRUMENT PANEL SAFETY PAD RETAINER WITH AIR CONDITIONING CONTROL ASSEMBLY (except Sedan)

    1. E320727

      Disengage the 2 claws and 4 clips.

    2. Disconnect the connector to remove the center instrument panel safety pad retainer with air conditioning control assembly.

  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (except Sedan)

    1. E320775

      Remove the 4 screws.

    2. Disengage the 3 guides to remove the air conditioning control assembly.

  6. PRECAUTION (for Sedan)

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Sedan)

    for LHD with Entry and Start System:

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan)

    for Manual Transaxle:

    Click here

  9. REMOVE SHIFTING HOLE BEZEL (for Sedan)

    for Manual Transaxle:

    Click here

    for CVT:

    Click here

  10. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)

    Click here

  11. REMOVE UPPER CONSOLE PANEL (for Sedan)

    Click here

  12. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

  13. REMOVE NO. 1 INSTRUMENT PANEL REGISTER SUB-ASSEMBLY (for Sedan)

    Click here

  14. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for Sedan)

    Click here

  15. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Sedan)

    Click here

  16. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Sedan)

    Click here

  17. REMOVE NO. 1 SWITCH HOLE BASE (for Sedan)

    for LHD:

    Click here

    for RHD:

    Click here

  18. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Sedan)

    1. E278480

      Disengage the 2 claws and 5 clips.

    2. Disconnect the connector to remove the air conditioning control assembly.