PURGE VALVE REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Air Conditioning System)

    Click here

  2. REMOVE PURGE VALVE


    1. A004JNH

      Remove the nut which holds the purge valve onto the intake manifold.

    2. Disconnect the purge valve connector.

    3. A004J3FE02

      Disconnect the manifold absolute pressure sensor connector.

    4. Disconnect the No. 2 ventilation hose.

      Text in Illustration
      *1 air pressure sensor assembly connector
      *2 No. 2 ventilation hose
    5. A004KINE03
      Text in Illustration
      *1 No. 1 fuel vapor feed hose
      *2 No. 2 fuel vapor feed hose
      *3 Joint wire harness
      *4 purge valve

      Disconnect the No. 1 fuel vapor feed hose and No. 2 fuel vapor feed hose, and remove the purge valve with the joint wire harness.

    6. A004KTR

      Remove the joint wire harness from the purge valve assembly.