DOOR COURTESY LIGHT(for Rear Door) REMOVAL

PROCEDURE


  1. REMOVE COURTESY LIGHT ASSEMBLY


    1. for LH Side:


      1. Apply protective tape around the courtesy light assembly.

      2. Insert moulding remover A between the courtesy light assembly and rear door trim board sub-assembly LH from the front of the vehicle and detach the claw.

      3. Pull out the courtesy light assembly to detach the hook.

        B005RT1C01
        B006DHE Remove in this Direction B006GBM Protective Tape
      4. B005RX5

        Disconnect the connector.

    2. for RH Side:


      1. Apply protective tape around the courtesy light assembly.

      2. Insert moulding remover A between the courtesy light assembly and rear door trim board sub-assembly RH from the front of the vehicle and detach the claw.

      3. Pull out the courtesy light assembly to detach the hook.

        B005RYCC01
        B006DHE Remove in this Direction B006GBM Protective Tape
      4. B005VGV

        Disconnect the connector.