AIR PUMP(for Front Seat) INSPECTION

PROCEDURE


  1. INSPECT LUMBER SUPPORT PUMP SUB-ASSEMBLY LH


    1. Check the operation of the lumber support pump sub-assembly LH..


      1. B005TKDC06
        *a

        Component without harness connected

        (Lumber Support Pump Sub-Assembly LH)

        Check that the lumbar support pump sub-assembly LH moves smoothly when the battery is connected to the connector terminals.

        OK
        Tester Connection Specified Condition

        S10-1 - battery positive (+)

        S10-2 - battery negative (-)

        		 Lumber support pump operates
        If the result is not as specified, replace the lumber support pump sub-assembly LH.

  2. INSPECT LUMBER SUPPORT PUMP SUB-ASSEMBLY RH


    1. Check the operation of the lumber support pump sub-assembly RH..


      1. B005TKDC05
        *a

        Component without harness connected

        (Lumber Support Pump Sub-Assembly RH)

        Check that the lumbar support pump sub-assembly RH moves smoothly when the battery is connected to the connector terminals.

        OK
        Tester Connection Specified Condition

        S2-1 - battery positive (+)

        S2-2 - battery negative (-)

        		 Lumber support pump operates
        If the result is not as specified, replace the lumber support pump sub-assembly RH.