ЗАПУСК И ОСТАНОВ


  1. CONSTRUCTION


    1. The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.

    2. The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.


      • Navigation Receiver Assembly*1

      • Television Display Assembly*2

      • Blind Spot Monitor Sensor LH*3

      • Blind Spot Monitor Sensor RH*3

      • Central Gateway ECU (Network Gateway ECU)

      • Integration Control and Panel Assembly

      • Power Steering ECU Assembly

      • Clearance Warning ECU Assembly

      • Parking Brake ECU Assembly

      • Inner Rear View Mirror Assembly

      • Air Conditioning Control Assembly

      • Electric Oil Pump for CVT

      • Combination Meter Assembly

      • Steering Sensor

      • Skid Control ECU (Brake Actuator Assembly)

      *1: Models with navigation system

      *2: Models with rear seat entertainment system

      *3: Models with blind spot monitor system

      B006K7WE01

    3. Models with Navigation System


      1. An external backup boost converter (eco run vehicle converter assembly) is used.

      2. When the audio system is used during idle stop, the external backup boost converter (eco run vehicle converter assembly) compensates for the voltage drop to supplement audio playback by stabilizing the sound quality.

        B006K8QE08
        *1 PA-BBC Fuse
        *2 External Backup Boost Converter (Eco Run Vehicle Converter Assembly)
        *3 Stereo Component Amplifier Assembly
        *4 Engine Stop and Start ECU