FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:U0100, U0101, U0123, U0129, U0142, U0182

DTC Code DTC Name
U0100 Lost Communication with ECM / PCM "A"
U0101 Lost Communication with TCM
U0123 Lost Communication with Yaw Rate Sensor Module
U0129 Lost Communication with Brake System Control Module
U0142 Lost Communication with Body Control Module "B"
U0182 Lost Communication with AFS ECU

DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0100 Lost Communication with ECM / PCM "A" While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • ECM

  • Forward recognition camera

U0101 Lost Communication with TCM While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the TCM (ECM) and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • TCM (ECM)

  • Forward recognition camera

U0123 Lost Communication with Yaw Rate Sensor Module While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the yaw rate sensor and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • Yaw rate sensor assembly (w/ VDIM)

  • Yaw rate sensor (Airbag sensor assembly) (w/o VDIM)

  • Forward recognition camera

U0129 Lost Communication with Brake System Control Module 2 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • Skid control ECU (Brake actuator assembly)

  • Forward recognition camera

U0142 Lost Communication with Body Control Module "B" 2 seconds after the engine switch is turned on (IG), a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • Main body ECU (Multiplex network body ECU)

  • Forward recognition camera

U0182 Lost Communication with AFS ECU 2 seconds after the engine switch is turned on (IG), a communication error between the headlight ECU sub-assembly and the forward recognition camera is detected for approximately 5 seconds or more.
  • CAN communication system

  • Headlight ECU sub-assembly LH

  • Headlight ECU sub-assembly RH

  • Forward recognition camera

PROCEDURE


  1. CHECK FOR DTCs (FORWARD RECOGNITION CAMERA SYSTEM)


    1. Clear the DTCs.

      Click here


      Chassis > Front Recognition Camera > Clear DTCs
    2. Perform the following procedure.

      Tech Tips

      If the following procedure is not performed, the previously output DTC cannot be detected.


      1. Turn the engine switch on (IG) and wait 2 seconds or more.

      2. Drive the vehicle at a speed of 1 km/h or 1 mph or more for 5 seconds or more.

    3. Check for DTCs.

      Click here


      Chassis > Front Recognition Camera > Trouble Codes
      Result
      Result Proceed to
      DTC U0100, U0101, U0123, U0129, U0142 and U0182 are not output A
      DTC U0100, U0101, U0123, U0129, U0142 or U0182 is output B

    A
    B