SHIFT AND SELECT LEVER SHAFT REASSEMBLY

PROCEDURE

1. INSTALL RELEASE HEAD

   1. Install the release head to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the slotted spring pin to the shift and select lever shaft.

      Standard depth

      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

      Note:

      Make sure the installation direction is correct.

2. INSTALL FRONT INNER SHIFT LEVER

   1. Install the front inner shift lever to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the front inner shift lever and slotted spring pin to the shift and select lever shaft.

      Standard depth

      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)

      Note:

      Make sure the installation direction is correct.

3. INSTALL INNER NO. 2 SHIFT LEVER

   1. Install the inner No. 2 shift lever to the shift and select lever shaft.

   2. 

      *a

      Depth

      Using a 5 mm pin punch and hammer, tap in the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

      Standard depth

      0 to 0.6 mm (0 to 0.0236 in.)

      Note:

      Make sure the installation direction is correct.