PANORAMIC VIEW MONITOR SYSTEM, Diagnostic DTC:U1000

DTC Code DTC Name
U1000 CAN Communication Failure (Message Registry)

DESCRIPTION

If DTC U1000 is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.

DTC No. Detection Item DTC Detection Condition Trouble Area
U1000 CAN Communication Failure (Message Registry) ECU malfunction Parking assist ECU

PROCEDURE


  1. CHECK FOR DTC


    1. Clear the DTCs.

      Click here


      Chassis > Panoramic View Monitor > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > Panoramic View Monitor > Trouble Codes
      OK
      DTC U1000 is not output.
      Result
      Proceed to
      OK
      NG

      Tech Tips

      If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform the inspection again, even though the DTC was not output when rechecking for DTCs.

      Click here


    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    REPLACE PARKING ASSIST ECU Click here