REAR CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE

  1. INSTALL REAR CRANKSHAFT OIL SEAL

    1. Apply MP grease to the lip of a new rear crankshaft oil seal.

      Note:

      • Do not allow foreign matter to contact the lip of the oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. A228392C01

      Using SST and a hammer, tap in the rear crankshaft oil seal until its surface is flush with the rear oil seal retainer edge.

      09223-15030

      09950-70010

      09951-07150

      Note:

      • Keep the lip free from foreign matter.

      • Do not tap the rear crankshaft oil seal at an angle.

  2. INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click hereClick here

  3. INSTALL AUTOMATIC TRANSMISSION ASSEMBLY

    1. Install the automatic transmission assembly (Click here).