CANISTER INSPECTION

PROCEDURE

1. CHECK CHARCOAL CANISTER ASSEMBLY

   1. 

      *1	Port A
      *2	Port B
      *3	Port C
      	Air

      Close port C, apply compressed air to port A and check that air flows out from port B.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

   2. 

      *1	Port A
      *2	Port B
      *3	Port C
      	Air

      Close port C, apply compressed air to port B and check that air flows out from port A.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

   3. 

      *1	Port A
      *2	Port B
      *3	Port C
      	Air

      Apply compressed air to port B and check that air flows out from port A and port C.

      If the result is not as specified, replace the fuel suction plate sub-assembly.

   4. 

      *1	Port A
      *2	Port B
      *3	Port C

      Close ports A and C, and apply compressed air to port B to check for leaks.

      If the result is not as specified, replace the fuel suction plate sub-assembly.