SIMPLE INTELLIGENT PARKING ASSIST SYSTEM Vehicle does not Move to Set Parking Position

DTC Code DTC Name
Vehicle does not Move to Set Parking Position

PROCEDURE

  1. CHECK TIRE SIZE

    1. Check that the tire pressure and tire size are as specified.

    2. Check that there is no excessive wear on the tires.

    Result

    Result

    Proceed to

    Tire size is as specified and there is no excessive wear

    A

    Tire size is not as specified but there is no excessive wear

    Tire size is as specified but there is excessive wear

    B

    Tire size is not as specified and there is excessive wear

    Tire size is totally different from specified size
    B

    REPLACE TIRES

    A

  2. CHECK TIRE ROTATION

    1. Check tire movement distance.

      E127424C03

      *a

      5 Rotations

      *b

      Chalk Mark

      *c

      Movement Distance (A)

      -

      -

      1. On a level surface, center the steering wheel and stop the vehicle.

      2. Apply chalk to a point on the tire and on the ground.

      3. Drive the vehicle straight ahead, and stop the vehicle after the tire rotates 5 times.

      4. Mark the vehicle stop position on the ground, and measure the movement distance (A). Check that the measured distance is within the standard range.

        OK

        9565 to 9955 mm (31.37 to 32.65 ft.)

    Result

    Proceed to

    OK

    NG
    NG

    REPLACE TIRES

    OK

  3. CHECK WHEEL ALIGNMENT

    1. Perform the front wheel alignment inspection.

      Tip:

      For alignment inspection, follow the toe-in and camber specifications.

      Click hereClick hereClick hereClick hereClick here

      OK

      Alignment is within specifications.

    2. Perform the rear wheel alignment inspection.

      Tip:

      For alignment inspection, follow the toe-in and camber specifications.

      for Double Wishbone Type Suspension:Click hereClick hereClick hereClick here

      for Torsion Beam Type Suspension:Click hereClick hereClick hereClick here

      OK

      Alignment is within specifications.

    Result

    Proceed to

    OK

    NG
    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click hereClick hereClick here

    NG

    ADJUST WHEEL ALIGNMENT

    for Front Wheel:Click hereClick hereClick hereClick hereClick here

    for Rear Wheel (for Double Wishbone Type Suspension):Click hereClick hereClick hereClick here

    for Rear Wheel (for Torsion Beam Type Suspension):Click hereClick hereClick hereClick here