SIDE MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE RADIATOR GRILLE


    1. A01DYIBE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    2. Remove the 2 clips and 2 screws.

    3. A01DY0N

      Detach the 6 claws and remove the radiator grille.

  2. REMOVE FRONT BUMPER COVER


    1. A01E1J7

      Remove the 3 clips and 6 screws.

    2. A01E0DPE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper cover.

    3. Remove the 2 bolts, 2 screws and 5 clips.

    4. w/ Fog Light:

      Disconnect the 2 fog light connectors.

    5. w/ Headlight Cleaner System:

      Disconnect the No. 1 headlight cleaner hose.

    6. A01DVR7

      Detach the 6 claws and remove the front bumper cover.

  3. REMOVE FRONT FENDER MUDGUARD LH (w/ Mudguard)


    1. A01E02B

      w/o Outside Moulding:

      Remove the 3 screws and front fender mudguard.

    2. A01E2GB

      w/ Outside Moulding:

      Remove the 4 screws and front fender mudguard.

  4. REMOVE FRONT WHEEL OPENING EXTENSION LH


    1. A01E0P4E01
      Text in Illustration
      *1 Protective Tape

      w/ Mudguard:


      1. Put protective tape around the front wheel opening extension.

      2. Remove the 4 screws.

    2. A01E2YYE01
      Text in Illustration
      *1 Protective Tape

      w/o Mudguard:


      1. Put protective tape around the front wheel opening extension.

      2. Remove the 7 screws.

    3. A01E1R7

      Detach the 8 clips and remove the front wheel opening extension.

    4. Remove the 8 clips from the vehicle body.

  5. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)


    1. A01DX9OE01
      Text in Illustration
      *A w/o Outside Moulding
      *B w/ Outside Moulding

      Remove the 4 screws and rear quarter panel mudguard.

  6. REMOVE REAR NO. 1 WHEEL OPENING EXTENSION SUB-ASSEMBLY LH


    1. w/ Mudguard:


      1. A01E10UE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the No. 1 rear wheel opening extension.

      2. Remove the 5 screws.

    2. w/o Mudguard:


      1. A01DY1SE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the No. 1 rear wheel opening extension.

      2. Remove the 8 screws.

    3. A01DZAI

      Detach the 11 clips and remove the No. 1 rear wheel opening extension.

    4. Remove the 11 clips from the vehicle body.