LEXUS PARKING ASSIST-SENSOR SYSTEM


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Clearance Warning ECU Assembly

    • Judges the approximate distance between the vehicle and an obstacle based on signals from the ultrasonic sensors. Output signals are sent to the combination meter assembly or radio receiver assembly.

    • Sounds the No. 1 clearance warning buzzer.
    No. 1 Ultrasonic Sensor Detects the distance between the vehicle and an obstacle.
    No. 1 Clearance Warning Buzzer Sounds to inform the driver according to the distance to the obstacle.
    Combination Meter Assembly Lexus Parking Assist-sensor System Indicator Light Illuminates to inform the driver when the system operation conditions are met.
    Multi-information Display

    • Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.

    • Sends Lexus parking assist-sensor system on/off signals to the clearance warning ECU assembly.

    • The sound volume, distance required to sound the buzzer and distance required to trigger the display can be chosen on the setup screen for the Lexus parking assist-sensor system.

    • Displays the mute function setting screen.

    • Displays an indication of a malfunction or freezing of an ultrasonic sensor to inform the driver.
    Master Warning Light Illuminates when the Lexus parking assist-sensor system is malfunctioning.
    Meter Buzzer Sounds when the Lexus parking assist-sensor system is malfunctioning.
    Multi-display Assembly Displays the location of an obstacle and the approximate distance between the vehicle and the obstacle.
    Steering Pad Switch Assembly Sends operation signals from switches to the combination meter assembly.
    Park/Neutral Position Switch Assembly Transmits the shift position signal to the ECM.
    Remote Touch (Remote Operation Controller Assembly) Transmits operation signals to the radio receiver assembly.
    Parking Assist ECU*1 The clearance sonar information is superimposed on the captured image. Then, the image is sent to the multi-display assembly as video signals.
    Rear Television Camera Assembly*2

    • Captures images of the area behind the vehicle.

    • The clearance sonar information is superimposed on the captured image. Then, the image is sent to the multi-display assembly as video signals.
    Skid Control ECU Sends the vehicle speed signal to the clearance warning ECU assembly.
    Air Conditioning Amplifier Assembly Sends outside temperature information to the clearance warning ECU assembly.
    Radio Receiver Assembly

    • Displays a video from the parking assist ECU on the multi-display assembly.*1

    • Displays a video from the rear television camera assembly on the multi-display assembly.*2
    ECM Sends the shift position signal to the clearance warning ECU assembly.
    Central Gateway ECU (Network Gateway ECU) Relays the signal between the CAN communication lines.

    *1: Models with panoramic view monitor system

    *2: Models with parking assist monitor system

  2. OPERATING CONDITION


    1. The operating condition of each sensor differs according to its installed position as shown in the table below:

      Installation Position Operating Condition
      Front Corner

      • Engine switch is on (IG).

      • System is activated.

      • Shift lever is not in P.

      • Vehicle speed is approximately 10 km/h (6 mph) or less.*
      Front Center

      • Engine switch is on (IG).

      • System is activated.

      • Shift lever is not in P and R.

      • Vehicle speed is approximately 10 km/h (6 mph) or less.
      Rear Center

      • Engine switch is on (IG).

      • System is activated.

      • Shift lever is in R.
      Rear Corner

      • Engine switch is on (IG).

      • System is activated.

      • Shift lever is in R.

      *: Operates regardless of the vehicle speed when the shift lever is in R.

  3. SYSTEM CONTROL


    1. Detection Area


      1. The detection areas of the ultrasonic sensor are as shown in the following illustration.

      2. These detection areas are applicable when positioning a 60 mm (2.36 in.) diameter pole parallel or perpendicular to the ground. The ranges vary depending on the measuring method and type of obstacle.

        Figure 1. Corner Area

        B008G57C02
        *a Approximately 850 mm (33.5 in.) *b Approximately 200 mm (7.87 in.)
        *c Approximately 600 mm (23.6 in.) *d Approximately 450 mm (17.7 in.)
        *e Approximately 350 mm (13.8 in.) - -
        B008G5S Detection Area - -

        Note

        The ultrasonic sensor side view detection range area (labeled (1)) represents the cross section of the top view of the lines of detection range A. The area (1) does not represent the entire side view detection range.

        Figure 2. Center Area

        B008G79C02
        *a Approximately 2000 mm (78.7 in.) *b Approximately 1000 mm (39.4 in.)
        *c Approximately 200 mm (7.87 in.) *d Approximately 1250 mm (49.2 in.)
        *e Approximately 1500 mm (59.1 in.) *f Approximately 1900 mm (74.8 in.)
        *g Approximately 500 mm (19.7 in.) *h Approximately 300 mm (11.8 in.)
        *i Approximately 600 mm (23.6 in.) - -
        B008G5S Detection Area - -

    2. Detective Information Indication


      1. The location of an obstacle and the approximate distance between the vehicle and the obstacle are displayed on the multi-information display in the combination meter assembly and multi-display assembly.

      2. Indication on Multi-information Display


        • When the front center sensor or rear center sensor detects an obstacle, the location and approximate distance are indicated using 4 patterns: "Longest", "Long", "Middle" and "Short".

        • When the front corner sensor or rear corner sensor detects an obstacle, the location and approximate distance are indicated using 3 patterns: "Long", "Middle" and "Short".

          Figure 3. Longest (Yellow Illuminates)

          B008G8UE01
          Sensor Position Detection Distance
          (A) Front Center 600 mm +/- 60 mm to 1000 mm +/- 100 mm (23.6 in. +/- 2.36 in. to 39.4 in. +/- 3.94 in.)
          (B) Rear Center 600 mm +/- 60 mm to 1500 mm +/- 150 mm (23.6 in. +/- 2.36 in. to 59.1 in. +/- 5.91 in.)

          Figure 4. Long (Yellow Illuminates)

          B008G3XE01
          Sensor Position Detection Distance
          (A) Front Center 450 mm +/- 50 mm to 600 mm +/- 60 mm (17.7 in. +/- 1.97 in. to 23.6 in. +/- 2.36 in.)
          (B) Front Corner 450 mm +/- 50 mm to 600 mm +/- 60 mm (17.7 in. +/- 1.97 in. to 23.6 in. +/- 2.36 in.)
          (C) Rear Corner 450 mm +/- 50 mm to 600 mm +/- 60 mm (17.7 in. +/- 1.97 in. to 23.6 in. +/- 2.36 in.)
          (D) Rear Center 450 mm +/- 50 mm to 600 mm +/- 60 mm (17.7 in. +/- 1.97 in. to 23.6 in. +/- 2.36 in.)

          Figure 5. Middle (Yellow Illuminates)

          B008G98E01
          Sensor Position Detection Distance
          (A) Front Center 350 mm +/- 40 mm to 450 mm +/- 50 mm (13.8 in. +/- 1.57 in. to 17.7 in. +/- 1.97 in.)
          (B) Front Corner 350 mm +/- 40 mm to 450 mm +/- 50 mm (13.8 in. +/- 1.57 in. to 17.7 in. +/- 1.97 in.)
          (C) Rear Corner 350 mm +/- 40 mm to 450 mm +/- 50 mm (13.8 in. +/- 1.57 in. to 17.7 in. +/- 1.97 in.)
          (D) Rear Center 350 mm +/- 40 mm to 450 mm +/- 50 mm (13.8 in. +/- 1.57 in. to 17.7 in. +/- 1.97 in.)

          Figure 6. Short (Red Blinks)

          B008G1EE01
          Sensor Position Detection Distance
          (A) Front Center 350 mm +/- 40 mm or less (13.8 in. +/- 1.57 in. or less)
          (B) Front Corner 350 mm +/- 40 mm or less (13.8 in. +/- 1.57 in. or less)
          (C) Rear Corner 350 mm +/- 40 mm or less (13.8 in. +/- 1.57 in. or less)
          (D) Rear Center 350 mm +/- 40 mm or less (13.8 in. +/- 1.57 in. or less)

      3. Indication on Multi-display Assembly (Models with Parking Assist Monitor System)


        • If an obstacle is detected when the parking assist monitor system is activated, the approximate distance between the vehicle and the obstacle is displayed on the multi-display assembly.

        • The distance is displayed by color based on the actual distance to the obstacle. When an obstacle is detected at the long or middle distance, the indicator is yellow. The color changes from yellow to red when the distance becomes short.

          B008G6TC03
          *a Front Corner LH *b Rear Corner LH
          *c Rear Center *d Rear Corner RH
          *e Front Corner RH *f Front Center

        • When the front center sensor or rear center sensor detects an obstacle, the location and approximate distance are indicated using 4 patterns: "Longest", "Long", "Middle" and "Short".

        • When the front corner sensor or rear corner sensor detects an obstacle, the location and approximate distance are indicated using 3 patterns: "Long", "Middle" and "Short".

      4. Indication on Multi-display Assembly (Models with Panoramic View Monitor System)


        • If an obstacle is detected when the parking assist monitor system is activated, the approximate distance between the vehicle and the obstacle is displayed on the multi-display assembly.

        • The distance is displayed by color based on the actual distance to the obstacle. When an obstacle is detected at the long or middle distance, the indicator is yellow. The color changes from yellow to red when the distance becomes short.

          B008GACC01
          *a Obstacle Detection Information *b Panoramic View Vehicle Icon
          B008G67C01
          *a Obstacle Detection Information - -

        • When the front center sensor or rear center sensor detects an obstacle, the location and approximate distance are indicated using 4 patterns: "Longest", "Long", "Middle" and "Short".

        • When the front corner sensor or rear corner sensor detects an obstacle, the location and approximate distance are indicated using 3 patterns: "Long", "Middle" and "Short".

  4. FUNCTION


    1. System Setting


      1. The No. 1 clearance warning buzzer audio volume can be adjusted and the Lexus parking assist-sensor system can be turned on and off by operating the multi-information display using the steering pad switch assembly.

    2. Sensor Check Function


      1. After the system power source is turned on, all sensors are checked regardless of the vehicle speed and shift position. If there is an open circuit or freezing malfunction in the sensor, the multi-information display in the combination meter assembly displays a warning message and the meter buzzer sounds to inform the driver. In addition, each sensor is checked for malfunctions even when obstacles are being detected. If a malfunction occurs, a warning message is also displayed.

        B008G9Y

  5. DIAGNOSIS


    1. If a system malfunction is detected, the clearance warning ECU assembly stores Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.