QUARTER WINDOW GLASS REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY

   Click here

2. REMOVE DECK BOARD ASSEMBLY

   Click here

3. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY

   Click here

4. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY

   Click here

5. REMOVE REAR DECK FLOOR BOX (w/ Spare Tire)

   Click here

6. REMOVE SPARE TIRE (w/ Spare Tire)

   Click here

7. REMOVE DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

8. REMOVE DECK FLOOR BOX RH (w/ Spare Tire)

   Click here

9. REMOVE NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

   Click here

10. REMOVE NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

    Click here

11. REMOVE DECK FLOOR BOX LH (w/o Spare Tire)

    Click here

12. REMOVE DECK FLOOR BOX RH (w/o Spare Tire)

    Click here

13. REMOVE NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

14. REMOVE NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

    Click here

15. REMOVE REAR FLOOR FINISH PLATE

    Click here

16. REMOVE REAR SEAT ASSEMBLY (for Manual Seat)

    Click here

17. REMOVE REAR SEAT ASSEMBLY (for Power Seat)

    Click here

18. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

19. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

20. REMOVE BACK DOOR WEATHERSTRIP

    Click here

21. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

22. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

23. REMOVE ROPE HOOK ASSEMBLY

    Click here

24. REMOVE NO. 3 BATTERY SERVICE COVER BOARD

    Click here

25. REMOVE DECK TRIM UPPER SIDE BOARD LH

    Click here

26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

27. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

28. REMOVE QUARTER WINDOW ASSEMBLY LH

    

    *1	Protective Tape

    Note

    
    

    • When separating the quarter window assembly LH from the vehicle, be careful not to damage the vehicle paint or interior/exterior ornaments.

    • Be sure to replace the quarter window assembly LH with a new one.

    Tech Tips

    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    
    

    1. Using a knife, cut off the moulding as shown in the illustration.

       Note

       Be careful not to damage the vehicle body.

    2. 

       *a	Piano Wire
       *b	Clip

       From the interior, insert a piano wire between the vehicle body and the quarter window assembly LH as shown in the illustration.

    3. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

    4. Cut through the adhesive by pulling the piano wire around the quarter window assembly LH.

       Note

       Leave as much adhesive on the vehicle body as possible when removing the quarter window assembly LH.

    5. 

       Using suction cups, detach the 3 clips and remove the quarter window assembly LH.

       Note

       Be careful not to drop the quarter window assembly LH.

       Tech Tips

       If a clip is difficult to detach, cut it.