FUEL PUMP DISASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click here

PROCEDURE


  1. REMOVE NO. 1 FUEL SUB-TANK


    1. B008I55

      Disconnect the wire harness connector.

    2. B008H8BC01
      *1 Fuel Suction Plate
      *2 E-Ring
      B008IUL Lower

      Using needle nose pliers, remove the E-ring.

      Tech Tips

      Slightly lower the fuel suction plate to remove the E-ring.

    3. B008HWU

      Remove the 2 springs from the fuel suction plate.

    4. B008ING

      Detach the 2 claws and remove the No. 1 fuel sub-tank.

    5. B008IRB

      Detach the claw of the jet pump nozzle.

    6. B008HQYC01
      *1 Jet Pump
      *2 Protective Tape

      Using a screwdriver, remove the jet pump.

      Tech Tips

      Tape the screwdriver tip before use.

    7. B008HRCC01
      *1 Jet Pump
      *2 O-Ring

      Remove the O-ring from the jet pump.

  2. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. B008HVU

      Using needle nose pliers, detach the 2 claws and remove the No. 1 fuel suction support.

  3. REMOVE FUEL PUMP


    1. B008JLG

      Detach the 5 claws on the fuel filter assembly and remove the fuel pump from the fuel filter assembly.

      Note

      When detaching the claw, do not disconnect the fuel main tube.

    2. B008GP8

      Disconnect the fuel pump connector.

    3. B008H4UC01
      *1 O-Ring
      *2 Fuel Pump Spacer

      Remove the O-ring from the fuel filter assembly.

    4. Remove the fuel pump spacer from the fuel pump.