INPUT SHAFT DISASSEMBLY

PROCEDURE

  1. REMOVE INPUT SHAFT REAR BEARING SHAFT SNAP RING

    1. C112390

      Using a snap ring expander, remove the input shaft rear bearing shaft snap ring from the input shaft.

  2. REMOVE INPUT SHAFT REAR RADIAL BALL BEARING

    1. C112391N01

      Using SST, remove the input shaft rear radial ball bearing from the input shaft.

      09950-40011

      09951-04020

      09952-04010

      09953-04020

      09954-04010

      09955-04011

      09957-04010

      09958-04011

      09631-20031

  3. REMOVE 6TH DRIVE GEAR

    1. C145266N01

      Using SST and a press, remove the 6th drive gear from the input shaft.

      09950-00020

  4. REMOVE 3RD DRIVE GEAR

    1. C117923N01

      Using SST and a press, remove the 3rd drive gear from the input shaft.

      09950-00020

    2. C112450

      Remove the spacer from the input shaft.

  5. REMOVE 4TH DRIVE GEAR

    1. C112393N01

      Using SST and a press, remove the 4th drive gear from the input shaft.

      09950-00020

  6. REMOVE INPUT SHAFT SNAP RING

    1. C112473

      Using 2 screwdrivers and a hammer, remove the input shaft snap ring from the input shaft.

  7. REMOVE INPUT SHAFT FRONT BEARING INNER RACE

    1. C112394N01

      Using SST and a press, remove the input shaft front bearing inner race from the input shaft.

      09950-00020