БЛОК СЦЕПЛЕНИЯ (для моделей с R151) УЗЛЫ И ДЕТАЛИ
ILLUSTRATION
| *A | for TR Engine | *B | for 5L-E Engine |
| *1 | CLUTCH COVER ASSEMBLY | *2 | CLUTCH DISC ASSEMBLY |
| *3 | CLUTCH RELEASE BEARING ASSEMBLY | *4 | CLUTCH RELEASE FORK BOOT |
| *5 | RELEASE FORK SUPPORT | *6 | INPUT SHAFT FRONT BEARING |
| *7 | CLUTCH RELEASE FORK SUB-ASSEMBLY | *8 | RELEASE BEARING HUB CLIP |
| *9 | CLUTCH RELEASE FORK SUPPORT BOOT | *10 | RELEASE FORK SUPPORT SPRING |
| *11 | FLYWHEEL SUB-ASSEMBLY | - | - |
 |
N*m (kgf*cm, ft.*lbf) : Specified torque | ● | Non-reusable part |
 |
Multemp 8158 grease or equivalent |  |
Toyota Genuine Clutch Spline Grease or equivalent |
 |
Do not apply lubricants | ★ | Precoated part |
| *T1 | 1st: 26.5 N*m (270 kgf*cm, 20 ft.*lbf) 2nd: Turn 90° |
- | - |