BACK DOOR THREE-DIMENSIONAL DISTANCE
Tech Tips
-
Point A, a on the vehicle are asymmetrical.
-
In cases in which only one dimension is given, left and right are symmetrical.
-
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Back Door Hinge Installation Hole | φ16 (0.63) |
| B, b | Back Door Damper Stay Installation Nut | M8 (0.31) |
| C, c | Roof Side Inner Rear Panel Corner | - |
| D, d | Quarter Panel Standard Hole | φ13 (0.51) |
| E, e | Deck Trim Side Panel Installation Hole | φ8.5 (0.33) |
| F, f | Rear Floor Finish Plate Installation Hole | φ8.5 (0.33) |
| G, g | Back Door Lock Striker Installation Nut | M8 (0.31) |
| H, h | Rear Bumper Reinforcement Installation Nut | M8 (0.31) |
| J, j | Rear Floor Cross Member No.2 Standard Hole | φ20 (0.79) |
| K, k | Center Body Pillar Assembly Mark | - |
| *a | Distance between points other than those above | *b | mm (in.) |