TCM REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick hereClick hereClick here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick hereClick hereClick here).

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click hereClick here

  5. REMOVE BATTERY INSULATOR

  6. REMOVE BATTERY

  7. REMOVE BATTERY TRAY

  8. REMOVE FRONT BATTERY BRACKET

    Click hereClick here

  9. REMOVE BATTERY BRACKET REINFORCEMENT

    Click hereClick here

  10. REMOVE TCM

    C133604

    1. Detach the claw, turn the lock lever and disconnect the connector from the TCM.

    2. C206488

      Remove the 2 bolts and pull up the TCM from the automatic transaxle assembly to remove it.