REAR BRAKE DISASSEMBLY

PROCEDURE


  1. REMOVE REAR DISC BRAKE PISTON


    1. A005BWX

      Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder assembly.

    2. Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the rear disc brake piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. A005A6LE02
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the cylinder boot from the rear disc brake cylinder.

      Note

      Be careful not to damage the rear disc brake cylinder.

  3. REMOVE PISTON SEAL


    1. A005AIZE02
      Text in Illustration
      *1 Vinyl Tape

      Using a screwdriver with its tip wrapped with vinyl tape, remove the piston seal from the rear disc brake cylinder.

      Note

      Be careful not to damage the inner cylinder or cylinder groove.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG