FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT FRONT WIPER MOTOR AND LINK ASSEMBLY

    1. E295202C01

      *a

      Dot

      Operate the front wiper motor and link assembly.

    2. Stop the front wiper motor and link assembly.

    3. Check the automatic stop (park) position.

      Tip:

      After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      Standard Clearance

      Area

      Measurement

      A

      10.0 mm (0.394 in.)

      OK

      The front wiper stops at the position shown in the illustration.