HEIGHT CONTROL WAY REMOVAL

CAUTION / NOTICE / HINT

Note

Be sure to read the "PRECAUTION" thoroughly before servicing.

Click here

PROCEDURE


  1. REMOVE FRONT WHEEL RH

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. REMOVE TRANSMISSION UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. REMOVE ENGINE SIDE COVER RH


    1. B006G9U

      Remove the 4 clips.

    2. Detach the claw and remove the engine side cover RH.

  6. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH


    1. B006B76C01
      B006AHR Thin-bladed Screwdriver Insertion Position

      Detach the 3 claws and remove the front fender wheel opening moulding RH.

      Tech Tips

      Insert a thin-bladed screwdriver from the vehicle side and bend the claw to remove it.

  7. REMOVE FRONT FENDER LINER RH


    1. Remove the 11 screws, 13 clips and front fender liner RH.

      B006FMQC01
      B006AHR clip B006EC9 screw

  8. REMOVE HEIGHT CONTROL WAY


    1. B006CTOC01
      *1 No. 8 Height Control Tube
      *2 Rear No. 8 Height Control Tube

      Disconnect the connector.

    2. Using SST, disconnect the No. 8 height control tube and rear No. 8 height control tube.

      SST
      09730-00020

      Click here

    3. B006GKB

      Remove the bolt and height control way.