HARD DISK DRIVE INSTALLATION

PROCEDURE

  1. PRECAUTION

    Note:

    Precautions for the multi-media module receiver assembly and hard disc.

    Click here

  2. INSTALL HARD DISC

    1. E270051

      Push the hard disc in the direction of the arrow shown in the illustration to install it.

    2. E270050

      Install the cover in the direction of the arrow shown in the illustration.

    3. Install the 2 screws.

  3. INSTALL NO. 1 RADIO BRACKET

    Click here

  4. INSTALL NAVIGATION ECU SUB-ASSEMBLY

    Click here

  5. INSTALL TELLTALE LIGHT ASSEMBLY

    Click here

  6. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  8. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here