REAR SPEED SENSOR(for AWD) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the LH side and RH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. RELEASE PARKING BRAKE

    Click here

  2. REMOVE REAR WHEEL

    Click here

  3. REMOVE NO. 2 TOOL BOX SUB-ASSEMBLY

    Click here

  4. REMOVE REAR SPEED SENSOR LH (w/ AVS)


    1. B005A6O

      Disconnect the 2 connectors.

    2. Disconnect the grommet of the rear speed sensor LH from the hole of the wheel house.

    3. B0057CP

      Remove the bolt and sensor clamp from the side member.

    4. B0058BEN01

      Disconnect the connector.

    5. Remove the nut, and then remove sensor clamp A together with sensor clamp B from the upper arm.

    6. Remove the nut and sensor clamp C from the upper arm.

    7. B00588QN01

      Remove the nut, and then remove sensor clamp A together with sensor clamp B.

    8. Remove the bolt and rear speed sensor LH.

      Note

      Prevent foreign matter from attaching to the rear speed sensor LH tip.

  5. REMOVE REAR SPEED SENSOR LH (w/o AVS)


    1. B00596K

      Disconnect the connector.

    2. Disconnect the grommet of the rear speed sensor LH from the hole of the wheel house.

    3. B00570K

      Remove the bolt and sensor clamp from the side member.

    4. Remove the 2 nuts and 2 sensor clamps from the upper arm.

    5. B0059P7

      Remove the nut and sensor clamp.

    6. Remove the bolt and rear speed sensor LH from the rear axle carrier.

      Note

      Prevent foreign matter from attaching to the rear speed sensor tip.