HEADLIGHT ASSEMBLY(for HID Headlight) DISASSEMBLY

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY

    1. E268960

      Turn the headlight light control ECU sub-assembly in the direction indicatedby the arrow in the illustration to separate the headlight light control ECU sub-assembly from the headlight unit.

      Note:

      • Do not apply excessive force using a tool.

      • Do not damage the headlight gasket or allow it to become contaminated with foreign matter. If the headlight gasket is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.

    2. E268962

      Turn the headlight light control ECU sub-assembly socket in the direction indicated by the arrow in the illustration to remove the headlight light control ECU sub-assembly.

      Note:

      Do not pull the headlight light control ECU sub-assembly with the socket connected.

  2. REMOVE HEADLIGHT GASKET

    E268999

    1. Remove the headlight gasket from the headlight light control ECU sub-assembly.

  3. REMOVE DISCHARGE HEADLIGHT BULB

    E268964N01

    1. Release the set spring lock in the order shown in the illustration and remove the discharge headlight bulb.

      Note:

      Do not touch the discharge headlight bulb glass.

  4. REMOVE NO. 2 HEADLIGHT BULB

    E268975

    1. Turn the No. 2 headlight bulb in the direction indicated by the arrow to remove it.

      Note:

      Do not touch the glass part of the bulb.

  5. REMOVE FRONT TURN SIGNAL LIGHT SOCKET

    E268977

    1. Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to remove them as a unit.

  6. REMOVE FRONT TURN SIGNAL LIGHT BULB

    E268979

    1. Remove the front turn signal light bulb from the front turn signal light socket.

  7. REMOVE CLEARANCE LIGHT BULB (w/o Daytime Running Light)

    1. E268981

      Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow to disconnect them as a unit.

    2. E268983

      Remove the clearance light bulb from the clearance light socket.