REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. Ball joints are used on the rear stabilizer link assembly, ensuring excellent response and high rigidity.

    2. Due to the use of semicircular metal fittings on each rear stabilizer bushing, the deflection amount of the bushing and the friction against the stabilizer bar is reduced. This enables the rear stabilizer bushing to be effective even during initial steering operation and ensures good roll characteristics.

      A01O7JAC01
      *1 Rear Stabilizer Bar *2 Rear Stabilizer Link Assembly
      *a Cross Section of Rear Stabilizer Bushing *b Metal Fitting for Reduced Friction