QUARTER PANEL END HOUSING ASSEMBLY REPLACEMENT

A004L4N

  1. REMOVAL

    Symbol meaning
    A004L9C Remove Weld Points
    A004L2L Remove Weld Points
    A004L8V Cut with Disc Sander etc.

      REMOVAL POINT

    1. Cut the quarter panel and fold it upward as shown in *1. Then cut through the welded area of the quarter panel inner rear and quarter inner panel rear, and remove the quarter panel extension rear lower.

    A004L2NE01

  2. INSTALLATION

    Symbol meaning
    A004L4Z Plug Weld
    A004L6I Plug Weld
    A004L9D Butt Weld

      INSTALLATION POINT

    1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

    2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

    3. After welding, apply body sealer to the corresponding parts. (See the painting / coating)

    4. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

    A004L01E01
    *1 QUARTER PANEL EXTENSION
    *2 REAR LOWER