ROCKER PANEL MOULDING INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL ROCKER PANEL MOULDING


    1. Engage the 9 clips as shown in the illustration.

      B004MMTC01
      B00847Z Install in this Direction - -

    2. Install a new grommet.

    3. Install the 6 screws.

    4. Install the rocker panel moulding with 8 new clips.

  2. INSTALL FRONT ROCKER PANEL MOULDING END COVER

    Click here