TRANSMISSION CONTROL CABLE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  5. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY


    1. Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.

  7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. REMOVE BATTERY CLAMP SUB-ASSEMBLY

    Click here

  9. REMOVE BATTERY

  10. REMOVE BATTERY TRAY

  11. DISCONNECT RADIATOR HOSE SUB-ASSEMBLY

    Click here

  12. REMOVE BATTERY CARRIER ASSEMBLY

    Click here

  13. REMOVE BATTERY BRACKET REINFORCEMENT

    Click here

  14. REMOVE REAR CONSOLE BOX ASSEMBLY

    Click here

  15. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. B008IQJ

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. B008GQBC01
      *a Nut

      Rotate the nut of the transmission control cable assembly clockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

  16. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. B008IRI

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    2. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

    3. B008JER

      Remove the nut and disconnect the transmission control cable assembly from the transmission control cable support.

    4. B008IVR

      Remove the bolt and disconnect the transmission control cable assembly from the rear engine mounting insulator.

    5. B008HRA

      Remove the 2 bolts and transmission control cable assembly.