REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY

    1. Remove the automatic transmission assembly (Click hereClick here).

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Click hereClick here

  3. REMOVE REAR CRANKSHAFT OIL SEAL

    1. A271706C01

      *1

      Protective Tape

      *2

      Cut Position

      Using a knife, cut off the lip of the rear crankshaft oil seal.

    2. Using a screwdriver, pry out the rear crankshaft oil seal.

      Tip:

      Tape the screwdriver tip before use.

      Note:

      Do not damage the surface of the rear crankshaft oil seal press fit hole or crankshaft.