NAVIGATION ANTENNA INSTALLATION

PROCEDURE

  1. INSTALL NAVIGATION ANTENNA CORD SUB-ASSEMBLY (for LHD)

    1. B222523

      Attach the 2 clamps to install the navigation antenna cord.

  2. INSTALL NAVIGATION ANTENNA ASSEMBLY (for LHD)

    1. B222507

      Install the navigation antenna with the 2 screws.

    2. Attach the 3 clamps.

    3. B222027

      Install the heater to register duct assembly with the 2 screws.

  3. INSTALL INSTRUMENT PANEL STAY LH (for LHD)

    Click here

  4. INSTALL NAVIGATION ANTENNA CORD SUB-ASSEMBLY (for RHD)

    1. B455843

      Attach the 2 clamps to install the navigation antenna cord.

  5. INSTALL NAVIGATION ANTENNA ASSEMBLY (for RHD)

    1. B222508

      Install the navigation antenna with the 2 screws.

    2. Attach the 3 clamps.

    3. B229223

      Install the heater to register duct assembly with the 2 screws.

  6. INSTALL INSTRUMENT PANEL STAY RH (for RHD)

    Click here

  7. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    1. Install the instrument panel safety pad (Click here).

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  9. CHECK SRS WARNING LIGHT

    1. Check the SRS warning light (Click here).