TELEMATICS SYSTEM, Diagnostic DTC:B15F0

DTC Code DTC Name
B15F0 VIN Not Programmed or Mismatch - DCM

DESCRIPTION

This DTC is stored when the Vehicle Identification Number (VIN) is not stored in the telematics transceiver or when the VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B15F0

VIN Not Programmed or Mismatch - DCM

When either of the following conditions is met:

  • The VIN is not stored in the telematics transceiver.

  • The VIN stored in the telematics transceiver and the VIN stored in the ECM do not match.

  • SFI system

  • CAN communication system

PROCEDURE

  1. REGISTER VIN

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON and wait for 10 seconds.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Telematics / Utility / Vin Synchronization

      Body Electrical > Telematics > Utility

      Tester Display

      VIN Synchronization

    6. According to the display on the GTS, perform VIN Synchronization to register the VIN to the telematics transceiver.

    Result

    Proceed to

    NEXT
    NEXT

  2. CHECK DTC

    1. Turn the ignition switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON and wait for 20 seconds.

    4. Turn the GTS on.

    5. Check for DTCs and check that no DTCs are output.

      Click here

      Body Electrical > Telematics > Trouble Codes

      OK

      No DTCs are output.

    Result

    Proceed to

    OK

    NG
    OK

    USE SIMULATION METHOD TO CHECK

    Click here

    NG

  3. CHECK CAN COMMUNICATION SYSTEM

    1. Check if CAN communication system DTCs are output.

      for LHD with Central Gateway ECU:

      Click here

      for LHD without Central Gateway ECU:

      Click here

      OK

      CAN communication system DTCs are not output.

    Result

    Result

    Result

    Proceed to

    OK (SFI SYSTEM)

    A

    OK (ECD SYSTEM)

    B

    NG

    C
    A

    GO TO SFI SYSTEM

    for 3ZR-FE(for K111, K111F):Click here

    for 3ZR-FE(except K111, K111F):Click here

    for 2AR-FE(w/o Canister Pump Module):Click here

    B

    GO TO ECD SYSTEM

    for 2AD-FHV:Click here

    for 2AD-FTV:Click here

    C

    GO TO CAN COMMUNICATION SYSTEM

    for LHD with Central Gateway ECU:

    Click here

    for LHD without Central Gateway ECU:

    Click here