ROOM TEMPERATURE SENSOR REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Click here

3. REMOVE LOWER INSTRUMENT PANEL (for LHD)

   Click here

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

   Click here

5. REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR (for RHD)

   
   

   1. 

      Disengage the 2 claws and remove the cooler (room temp. sensor) thermistor.

6. REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR (for LHD)

   Tech Tips

   Use the same procedure described for the RHD.