OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. A085603C09

      *a

      Adhesive

      Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive

      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    2. A153125

      Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

      Note:

      Do not start the engine for at least 1 hour after installation.

    3. Connect the engine oil pressure switch assembly connector.

  2. INSPECT FOR OIL LEAK

    Click here