ELECTRIC PARKING BRAKE ACTUATOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 ACTUATOR HARNESS CLAMP


    1. B006E22

      Connect the No. 1 actuator harness clamp with the 2 clamps.

  2. INSTALL NO. 2 ACTUATOR HARNESS CLAMP


    1. B006C0C

      Connect the No. 2 actuator harness clamp with the clamp.

  3. INSTALL NO. 1 CABLE SUPPORT BRACKET


    1. B006C8Q

      Install the No. 1 cable support bracket in the direction indicated by the arrow shown in the illustration.

  4. INSTALL NO. 2 CABLE SUPPORT BRACKET


    1. B006BXW

      Install the No. 2 cable support bracket in the direction indicated by the arrow shown in the illustration.

  5. INSTALL CABLE SUPPORT BRACKET


    1. B006ABP

      Install the parking brake cable support bracket in the direction indicated by the arrow shown in the illustration.

  6. INSTALL PARKING BRAKE ACTUATOR ASSEMBLY WITH BRACKET


    1. B006AOZ

      Install the parking brake actuator assembly with bracket with the 3 nuts.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }
    2. B006D47

      connect the 2 clamps to the rear suspension member sub-assembly.

    3. Install the parking brake actuator assembly with bracket with the bolt and 6 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
      B006EPB

  7. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here