INTAKE AIR CONTROL VALVE ACTUATOR(for TCV) REMOVAL

PROCEDURE

  1. REMOVE INTAKE MANIFOLD

    Click here

  2. REMOVE INTAKE AIR CONTROL VALVE ACTUATOR

    1. A196059

      Remove the 2 bolts, intake air control valve actuator and gasket from the intake manifold.

      Note:
      • A203084

        Make sure that foreign matter, such as water, oil, sand and iron particles, does not enter the gear chamber or actuator at the locations marked by the circles in the illustration.

      • A197294

        Do not loosen or remove the bolt and 2 nuts shown in the illustration.