PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSPECTION

PROCEDURE

  1. INSPECT PRE-CRASH SAFETY CITY BUZZER

    1. A303614

      Make sure that there is no looseness at the locking part and the connecting part of the connector.

    2. Disconnect the pre-crash safety city buzzer connector.

    3. Check both the connector and the terminal for deformation and corrosion.

      OK

      No deformation or corrosion.

    4. Connect a negative (-) lead from the battery to terminal 2, and a positive (+) lead to terminal 1 of the pre-crash safety city buzzer, and then check that the buzzer sounds.

      OK

      The pre-crash safety city buzzer sounds.

      If the result is not as specified, replace the pre-crash safety city buzzer.