REAR SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE REAR WHEEL

  2. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH

    1. C129671

      Support the rear No. 2 suspension arm with a jack using a wooden block to avoid damage.

      Note:

      Do not excessively jack up the rear No. 2 suspension arm assembly LH.

      Tip:

      Support the rear shock absorber at a position where it compresses by approximately 20 to 30 mm (0.788 to 1.181 in.).

    2. C229148

      Remove the 2 bolts and disconnect the shock absorber with the rear shock absorber bracket.

    3. C127561

      Remove the nut and bolt from the shock absorber upper side.

    4. Remove the shock absorber from the vehicle.

  3. REMOVE REAR SHOCK ABSORBER BRACKET LH

    1. C278706

      Remove the nut and bolt from the bracket.