CRUISE CONTROL SYSTEM(except 1ND-TV, 8NR-FTS) Cruise Main Indicator Light Circuit

DTC Code DTC Name
Cruise Main Indicator Light Circuit

DESCRIPTION

  • The ECM turns on the cruise control indicator by sending indicator output demand signals to the combination meter assembly using CAN communication.

  • The cruise control indicator illuminates in green when the cruise control system has been turned on using the ON-OFF switch. If a malfunction is detected, the cruise control indicator changes to amber (w/ multi-information display (segment LCD type)), or the cruise control indicator goes out and a warning message is displayed (w/ multi-information display (dot LCD type, color type)).

  • The cruise control indicator circuit uses CAN communication. If the cruise control indicator is not functioning correctly, check for CAN communication DTCs before troubleshooting this circuit.

CAUTION / NOTICE / HINT

Note:

Before replacing the ECM, refer to Service Bulletin.

PROCEDURE

  1. CHECK VEHICLE CONDITION

    1. Choose the model to be inspected.

    Result

    Result

    Proceed to

    Multi-information Display (Segment Type)

    A

    Multi-information Display (Dot LCD Type or Color Type)

    B
    B

    PERFORM ACTIVE TEST USING GTS (METER DISPLAY 1)Click here

    A

  2. PERFORM ACTIVE TEST USING GTS

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Check the cruise control indicator by performing the Active Test.

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Indicat. Lamp Cruise

      Cruise control indicator (illuminated in green)

      ON / OFF

      w/ Multi-information Display (Segment LCD Type)

      Cruise Indicator

      Cruise control indicator (illuminated in amber)

      ON / OFF

      w/ Multi-information Display (Segment LCD Type)

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Indicat. Lamp Cruise

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Cruise Indicator

      OK

      The cruise control indicator goes on or off.

    Result

    Proceed to

    OK

    NG
    NG

    GO TO METER / GAUGE SYSTEM

    Click here

    OK

  3. READ VALUE USING GTS (CCS INDICATOR M-CPU)

    1. Enter the following menus: Powertrain / Cruise Control / Data List.

    2. Read the Data List according to the display on the GTS.

      Powertrain > Cruise Control > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      CCS Indicator M-CPU

      Cruise control indicator light illumination signal (Main CPU)

      ON or OFF

      ON: Cruise control indicator light illuminated (green)

      OFF: Cruise control indicator light not on

      -

      Powertrain > Cruise Control > Data List

      Tester Display

      CCS Indicator M-CPU

    Result

    Result

    Proceed to

    The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch (ON-OFF switch).

    A

    The cruise control indicator does not illuminate but the Data List item CCS Indicator M-CPU changes according to the operation of the cruise control main switch (ON-OFF switch).

    B

    The cruise control indicator does not illuminate and the Data List item CCS Indicator M-CPU does not change according to the operation of the cruise control main switch (ON-OFF switch).

    C
    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here

    B

    REPLACE COMBINATION METER ASSEMBLY

    for Hatchback, Wagon:Click here

    for Sedan:Click here

    C

    REPLACE ECM

    for 1NR-FE:Click here

    for 1ZR-FAE:Click here

    for 1ZR-FE:Click here

    for 2ZR-FE:Click here

  4. PERFORM ACTIVE TEST USING GTS (METER DISPLAY 1)

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Perform the Active Test according to the display on the GTS.

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Meter Display 1

      Multi-information display

      OFF, All

      • w/ Multi-information Display (Dot LCD Type)

      • w/ Multi-information Display (Color Type)

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Meter Display 1

    Result

    Result

    Proceed to

    The multi-information display in the combination meter assembly turns on or off according to the operation of the Active Test.

    A

    The multi-information display in the combination meter assembly does not turn on or off according to the operation of the Active Test.

    B
    B

    GO TO METER / GAUGE SYSTEM

    Click here

    A

  5. READ VALUE USING GTS (CCS INDICATOR M-CPU)

    1. Enter the following menus: Powertrain / Cruise Control / Data List.

    2. Read the Data List according to the display on the GTS.

      Powertrain > Cruise Control > Data List

      Tester Display

      Measurement Item

      Range

      Normal Condition

      Diagnostic Note

      CCS Indicator M-CPU

      Cruise control indicator illumination signal (Main CPU)

      ON or OFF

      ON: Cruise control indicator illuminated in green

      OFF: Cruise control indicator not on

      -

      Powertrain > Cruise Control > Data List

      Tester Display

      CCS Indicator M-CPU

    Result

    Result

    Proceed to

    The cruise control indicator illuminates and turns off according to the operation of the cruise control main switch (ON-OFF switch).

    A

    The cruise control indicator does not illuminate but the Data List item CCS Indicator M-CPU changes according to the operation of the cruise control main switch (ON-OFF switch).

    B

    The cruise control indicator does not illuminate and the Data List item CCS Indicator M- CPU does not change according to the operation of the cruise control main switch (ON-OFF switch).

    C
    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Click here

    B

    REPLACE COMBINATION METER ASSEMBLY

    for Hatchback, Wagon:Click here

    for Sedan:Click here

    C

    REPLACE ECM

    for 1NR-FE:Click here

    for 1ZR-FAE:Click here

    for 1ZR-FE:Click here

    for 2ZR-FE:Click here