HAZARD WARNING SWITCH INSPECTION

PROCEDURE

  1. INSPECT TELLTALE LIGHT ASSEMBLY (HAZARD WARNING SWITCH)

    1. E269059C01

      *a

      Component without harness connected

      (Telltale Light Assembly (Hazard Warning Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      7 (TB) - 13 (E)

      Hazard warning signal switch off

      10 kΩ or higher

      Hazard warning signal switch on

      Below 1 Ω

      If the result is not as specified, replace the telltale light assembly (hazard warning switch).