ECM REMOVAL

PROCEDURE

1. PERFORM REGISTRATION

   Click here

2. PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click hereClick hereClick here

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick here

4. REMOVE NO. 1 ENGINE COVER

   Click hereClick hereClick here

5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

   Click hereClick hereClick here

6. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

7. REMOVE AIR CLEANER CASE

   Click hereClick hereClick here

8. REMOVE ECM

   1. Disconnect the 2 ECM connectors.

      1. 

         *1	Lock
         *a	Push

         Raise the 2 levers while pushing the locks on the levers and disconnect the 2 ECM connectors.

         Note:

         After disconnecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.

   2. 

      Remove the 3 bolts and ECM with bracket.

   3. 

      Remove the 4 screws, No. 1 ECM bracket and No. 2 ECM bracket.