IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

    Click here

  3. REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

    Click here

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

    Click here

  5. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

    Click here

  6. REMOVE NO. 2 CYLINDER HEAD COVER

    Click here

  7. REMOVE IGNITION COIL ASSEMBLY


    1. A005CI6

      Disconnect the 4 ignition coil connectors.

    2. Remove the 4 bolts and 4 ignition coils.

      Note

      When removing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

  8. REMOVE SPARK PLUG


    1. A005F21

      Using a 14 mm spark plug wrench, remove the 4 spark plugs.