BACK DOOR OPENER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tip:

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE

  1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    1. Install the back door opener switch assembly.

      Tip:

      Make sure the arrows on the back door opener switch and the back door garnish are pointing in the same direction.

  2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  3. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  4. INSTALL REAR LIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  5. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  6. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tip:

    Use the same procedure as for the LH side.

  7. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  8. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  9. INSTALL BACK DOOR SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  10. INSTALL BACK DOOR CENTER GARNISH

    Click here