WATER CONTROL VALVE INSPECTION

PROCEDURE


  1. INSPECT WATER CONTROL VALVE


    1. B006G7YC02
      *a

      Component without harness connected

      (Water Control Valve)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance (for Bank 1)
      Tester Connection Condition Specified Condition
      D39-4 (FCM+) - D39-5 (FCM-) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the water control valve.