FRONT SIDE MARKER LIGHT BULB REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. SEPARATE FRONT FENDER LINER

    Click here

  2. REMOVE FRONT MARKER LIGHT ASSEMBLY


    1. A004IH7E02
      Text in Illustration
      *1 Protective Tape
      *2 Service Hole

      Using a screwdriver wrapped with protective tape, disengage the claw from service hole.

      Tech Tips

      Insert screwdriver on the level.

    2. Disconnect the connector to remove the front marker light assembly.