BACK DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 BACK DOOR EMBLEM

    Click here

  2. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  3. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Install 4 new gaskets to the back door outside garnish sub-assembly.

    2. Install 7 new clips (back door outside garnish clip) to the back door outside garnish sub-assembly.

    3. B005YOJ

      Engage the 7 clips to install the back door outside garnish sub-assembly.

    4. Install the 4 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    5. Connect the connector.

  4. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH RH

    Click here

  7. INSTALL BACK DOOR CENTER GARNISH

    Click here